Research work · 2025

Visualization Analysis of Micro Defects Formation Phenomenon on Decorative Sheets During In-mold Decorating Injection Molding

Kaname Kondo, Hidetoshi Yokoi

Seikei-Kakou

Abstract

The decrease in the surface glossiness of molded products depending on molding conditions is a problem in in-mold decorating injection molding and decorative sheets. In this study, we clarified that the reduction of surface glossiness is attributable to a unique phenomenon where numerous identical micro defects are generated on the surface of the molded product. These defects are pronounced when sharp, thorn-like splinters remain on the mold cavity surface as a result of the mold finishing process. The results of visualization analysis during in-mold decorating injection molding showed that the micro defects mainly form during the cooling process and generally correlate with the movement trajectory of the decorative sheet due to resin shrinkage during molding. We thus propose a model on the interference between the decorative sheet and splinters on the cavity surface, and the formation of micro defects based on the degree of sharpness of the spine-like splinters on the cavity surface. Based on the formation model of micro defects, we proposed solutions to reduce the micro defects during in-mold decorating injection molding from the perspective of recovering from and eliminating defects by applying the viscoelastic properties of the sheet.

Download PDF

DOI: 10.4325/seikeikakou.37.82